Redundant Multi-Rate Dual Transponder 10 Gbps Repeater/Converter/Transponder
This transponder is a 10G fiber to fiber 3R converter repeater and transponder. This transponder supports SFP+ to SFP+ or XFP to XFP fiber connections. 1+1 Automatic optical line Protection Switching is supported for the Line ports. The transponder is protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) between these different optical module types.
The modules enable an extremely wide range of optical infrastructure solutions including media conversion, signal repeating, lambda conversion, and Wave Division Multiplexing(WDM). Especially suitable for DWDM ring network protection. The redundant multi-rate dual transponder fit HUA6000 Series CH04, CH08, CH20 Chassis. Function Media conversion Highlight 3R signal regeneration
Signal repeating
Lambda conversion
Supports 1+1 optical channel protection
Re-transmission
Re-shaping
Re-timing
Multi-rate supports 1Gbps ~ 10Gbps
Supports Loopback Test
Supports ALS
Flexible transmission of various protocols
Fiber Channel 1/2/4/8 /10Gbps
CPRI: 2/3/4/5/6/7
1G/10G Ethernet
SDH STM-4/16/64
Performance Parameter DWDM 1529.5~1565.50nm 850nm/1310nm/1550nm Ethernet :1G/10G SONET: OC-24, OC-48, OC-192 SDH :STM-16/64 Ordering Information Model Function Protocols Client Line HUA6000-OCPDX2XX Line-side 1 + 1 redundancy protection. LAN or WAN PHY :10G SONET: OC-192 2 x XFP 4 x XFP HUA6000-OCPDS2SS Line-side 1 + 1 redundancy protection. LAN or WAN PHY :1G/10G SONET: OC-24, OC-48, OC-192 2 x SFP+ 4 x SFP+
System Parameter
Technical Indicator
Center Wavelength
Compliance with ITU-I standardCWDM 1271 ~ 1611nm
Data Rate (Gbps)
Fiber Channel :1/2/4/8 /10GbpsCPRI: 2/3/4/5/6/7
3R Regeneration
Re-amplification, Re-shaping, Re-timing
Optical Channel Protection
1+1 optical channel protection, switching time＜30ms
Optical Interface Type
6xSFP+/6xXFP
NMS
TELNET, SNMP, WEB
Size
191 ( W ) x 253 ( D ) x 20 ( H ) mm
Environment
Operating Temperature
-10℃ ~ 60℃
Storage Temperature
-40℃ ~ 80℃
Relative Humidity
5% ~ 95% Non-condensing
Power Consumption
≤30W
10G Dual Multi-Rate transponder, Converter/Repeater 6XFP interfaces with 3R,
Fiber Channel : 8 /10GbpsCPRI:CPRI7
1.25G~10G Dual Multi-Rate transponder, Converter/Repeater 6xSFP+ interfaces with 3R,
Fiber Channel :1/2/4/8 /10GbpsCPRI:2/3/4/5/6/7
HUA6000 Series Chassis is the foundation for deploying and managing the HUANET multi-service mixed-media solutions. HUA6000 Series Chassis Optional CH04 Chassis: 482.5(W) x 350(D) x 44.5(H) mm 1U 19-inch chassis 1 network management slot 3 universal service slots CH08 Chassis: 482.5(W) x 350(D) x 89(H) mm 2U 19-inch chassis 1 network management slot 7 universal service slots CH20 Chassis: 482.5(W) x 350(D) x 222.5(H) mm 5U 19-inch chassis 1 network management slot 19 universal service slots Power Consumption: 1U <120W, 2U<200W, 5U<400W Support SNMP, Web, CLI multiple network management modes Support dual power supply redundancy protection, Power supply support AC: 220V / DC: -48V optional HUA6000 Series Chassis support multiple service intermixing: 100G Transponder 100G OEO 2x100G to 200G Muxponder 25G OEO 4/8/16 Channel CWDM MUX/DEMUX 4x25G to 100G Muxponder 2x10G OCP Transponder 4x10G SFP+ Transponder 8×1.25G Convergence 10G Muxponder EDFA Card Applications Telecom HUA DWDM transmission solution
4/8/16/40/48 Channel DWDM MUX/DEMUX,or OADM Card
OLP Optical Line Protection
Data center
5G Network
Long Haul Network
Fiber optical network
DWDM peer-to-peer case
DWDM chain network case
DWDM+OLP optical line protection Case
DWDM Ring network case
DWDM single fiber bidirectional networking case
DWDM ultra long distance solution
