Products
-
Original Huawei 10KM CFP2 Optical transceiver Module
Original Huawei 100GE CFP2 Modules CFP2-100G-LR4
-
Original Huawei 40KM CFP2 Optical Transceiver Module
Original Huawei 100GE CFP2 Modules CFP2-100G-ER4
-
Huawei XSHF for MA5800 16-Port Symmetric 10G GPON Interface Board
The H901XSHF board is an 16-port XGS-PON OLT interface board. It works together with the optical network unit (ONU) to provide XGS-PON access services.
-
8 Ports EDFA
Built-in optical fwdm,it can transmit broadband network and CATV together.
Adopts Er Yb Codoped double-clad fiber technology;
Catv input ports: 1 optional
Olt input ports: 4-32 optional
Com Output ports: 4-32 optional;
Optical output power: total output up to 15W（41dBm）;
Low noise figure: <6dB when input is 0dBm;
Perfect network management interface, in line with standard SNMP network management;
Intelligent temperature control system make the power consumption lower; -
64 Ports EDFA
Built-in optical fwdm,it can transmit broadband network and CATV together.
Adopts Er Yb Codoped double-clad fiber technology;
Catv input ports: 1 optional
Olt input ports: 4-32 optional
Com Output ports: 4-32 optional;
Optical output power: total output up to 15W（41dBm）;
Low noise figure: <6dB when input is 0dBm;
Perfect network management interface, in line with standard SNMP network management;
Intelligent temperature control system make the power consumption lower; -
32 Ports EDFA
Built-in optical fwdm,it can transmit broadband network and CATV together.
Adopts Er Yb Codoped double-clad fiber technology;
Catv input ports: 1 optional
Olt input ports: 4-32 optional
Com Output ports: 4-32 optional;
Optical output power: total output up to 15W（41dBm）;
Low noise figure: <6dB when input is 0dBm;
Perfect network management interface, in line with standard SNMP network management;
Intelligent temperature control system make the power consumption lower; -
16 Ports EDFA
Built-in optical fwdm,it can transmit broadband network and CATV together.
Adopts Er Yb Codoped double-clad fiber technology;
Catv input ports: 1 optional
Olt input ports: 4-32 optional
Com Output ports: 4-32 optional;
Optical output power: total output up to 15W（41dBm）;
Low noise figure: <6dB when input is 0dBm;
Perfect network management interface, in line with standard SNMP network management;
Intelligent temperature control system make the power consumption lower; -
High Power EDFA with RF
High-power 1550nm Fiber Amplifier With Optical Transmitter （RF All channel Input）
-
Single Port EDFA
Our module light pumped laser and Erbium-Doped Fiber is used by the original binding component from USA.
We have reliable optical light power output stabilizing circuit and laser electrical refrigerator temperature to control the circuit, guaranteed the complete machine optimum performance and the laser long life steady work..
The microprocessor software have laser condition monitor, digital display fault warning, network management and various function. Once the laser’s operational parameter deviate software establishes permission scope, it will close laser’s power automatically. The red light coruscate, prompt alarm and digitizing tablet will point out fault cause.
The microprocessor software provide RS-232 and 485 interface used for network management and remote monitoring.
We adopt 1RU 19” standard engine frame efficient switch power, 90-265V utility power. -
1310nm Optical Transmitter
1U 19’ standard case with liquid crystal display (LCD/VFD) in front panel;
Frequency bandwidth: 47—750 / 862MHz;
Output power from 4 to24mw;
Advanced pre-distortion correction circuit;
AGC/MGC;
Automatic power control (APC) and Automatic temperature control (ATC) circuit.
-
1550nm External Optical Transmitter
This series internal-modulated transmitter performs RF-to-optical signal conversions in 1550nm transmission link.
1U 19’ standard case with liquid crystal display (LCD/VFD) in front panel;
Frequency bandwidth: 47—750 / 862MHz;
Output power from 4 to24mw;
Advanced pre-distortion correction circuit;
AGC/MGC;
Automatic power control (APC) and Automatic temperature control (ATC) circuit.
-
1550nm Directly Optical Transmitter
1U 19’ standard case with liquid crystal display (LCD/VFD) in front panel;
Frequency bandwidth: 47—750 / 862MHz;
Output power from 4 to24mw;
Advanced pre-distortion correction circuit;
AGC/MGC;
Automatic power control (APC) and Automatic temperature control (ATC) circuit.
