Products
-
SFP28 Multi-Rate Quad Transponder 125M~32G Repeater/Converter/Transponder
SFP28 Multi-Rate Quad Transponder has 8 SFP28 slots, The device provides a flexible transmission of various protocols, such as 100M/1G /10G/25G Ethernet, SDH STM1/STM4/STM16/STM64, Fiber Channel 1/2/4/8 /10/16/32Gbps, CPRI, etc.
The SFP28 transponder supports multi-rate functionality with optical data rates from 1Gbps up to32Gbps;The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion. -
Redundant Multi-Rate Dual Transponder 10 Gbps Repeater/Converter/Transponder
This transponder is a 10G fiber to fiber 3R converter repeater and transponder. This transponder supports SFP+ to SFP+ or XFP to XFP fiber connections. 1+1 Automatic optical line Protection Switching is supported for the Line ports. The transponder is protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) between these different optical module types.
-
Blue/Red EDFA Optical Amplifier
Single Fiber Bidirectional EDFA Amplifier models include a Red and a blue port designed for single fiber DWDM Solution. The design of these models is used for single-fiber DWDM transmission systems.
-
Middle stage access EDFA Optical Amplifier-PA Card
With the application of long-distance systems becoming more and more extensive, our company’s self-developed middle stage access (MSA) EDFA, middle stage access (MSA) EDFA can effectively solve the insertion loss caused by DCM and OADM, offset the DCM and OADM bands. The resulting insertion loss reduces the additional degradation of the system OSNR.
-
EDFA Optical Amplifier – Booster Amplifier
EDFA Optical Amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). Integrated VOA can be automatically adjusted to achieve smooth gain spectrum. It can amplify the C-Band signal with or w/o middle stage access (MSA), which brings great flexibility for the network application.
-
Dispersion Compensation Module (DCM)
The Dispersion Compensation Modules are building blocks of the HUA6000 Optical Transport System and serve at optical communication nodes to correct the pulse spread phenomenon known as Chromatic Dispersion that reduces the maximal transmission distance of data in optical fibers.
-
DCM Dispersion Compensation Device
Huanet optical compensation function with slope dispersion compensation for standard single-mode fiber can DCM (G.652) were dispersion and dispersion slope compensation broad band in the C-band, allowing the system to optimize residual dispersion. In the dispersion compensation value of 1545nm wavelength dispersion can reach -2070ps / nm.
-
BIDI OLP Single Fiber
Traditional OLP protection requires four valuable core resources. However, in many places, due to insufficient fiber resources, it is impossible to provide excess fiber resources and optical line redundancy protection.
In view of the shortage of optical fiber resources and need to optical line redundancy protection, our company has developed BIDI OLP equipment to solve the problem of optical line protection in the case of insufficient optical cable resources. -
OLP 1+1 Optical Line Protector
Optical Line Protection (OLP) system is a new optical line protection subsystem developed with advanced technology of dynamic and synchronous optical switches. When communication quality is lower or equipment breaks down due to accidental fracture or bigger loss of optical fiber in the optical transmission line, the OLP system can switch the primary line to the secondary line within a short time, to ensure normal operation communication of line, which effectively prevent fiber or equipment fault and shorten the recovery time from hours to milliseconds.
-
1U Ultra-large Capacity Intelligent DWDM Transmission Platform
HUANET HUA6000 is a compact, high-capacity, low-cost OTN optical transmission system which introduced by HUANET. It adopts CWDM / DWDM common platform design, supports multi-service transparent transmission, and has flexible networking and access capabilities. Applicable to the national backbone network, provincial backbone network, metro backbone network and other core networks, to meet the needs of large-capacity nodes above 1.6T, is the industry‘s most cost-effective transmission application platform. Build a large-capacity WDM transmission expansion solution for IDC and ISP operators.
-
XGPON ONT 4GE+1VOIP+2USB+ AX3000 WiFi 6
This is a WIFI6 XG-PON Optical Network Terminal(HGU) designed for FTTH scenario. It supports L3 function to help subscriber construct intelligent home network. It provides subscribers rich, colorful,
individualized, convenient and comfortable services including voice(VoIP), video (IPTV) and high speed internet access. -
1GE XPON ONU with Realtek chipset
1GE ONU is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access. 1GE ONU is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. 1GE ONU adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0. 1GE ONU is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
1GE ONU is designed by Realtek chipset 9601D
