Products
-
Fiber Optic Distribution Box
A range of Fiber Optic Distribution box has been designed specifically for use within Fiber To The Home (FTTH) Passive Optical Networks (PON).
Fiber Distribution Box is a product range of compact, wall or pole mountable fiber enclosures for indoor and outdoor use. They are designed for be deployed in fiber network demarcation point to provide easy customer connection. In combination with a different adapter footprint and splitters, this system offers ultimate flexibility.
-
Fiber Optical Distribution Box
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing,
splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
-
Fiber Optical Distribution Box
Fiber access termination closure is able to hold
up to 16-24 subscribers and 96 splicing points as closure.
It is used as a splicing closure and a termination point for
the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.
-
Sc Fast Connector
Optical Fiber Connector can provide a quick and easy termination of fibers in the field. Options are available for 900 micron allowing the installer
to terminate and make connection in minutes at equipment and fiber patch panels.
Our quick connector system removes any requirement for epoxy, adhesives or costly curing ovens.All the key steps have been done in the factory
to ensure every connection is excellent.
High quality but low price because we bring these in direct from the manufacturer.
-
2KM 100G QSFP28
HUA-QS1H-3102D is a parallel 100Gb/s Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total system cost savings. The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s on 2km of single mode fiber.
An optical fiber ribbon cable with an LC/UPC Duplex connector can be plugged into the QSFP28 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through an MSA-compliant 38-pin edge type connector.
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module can be managed through the I2C two-wire serial interface.
-
40KM 100G QSFP28
HUA-QS1H3140D QSFP28 transceiver module is designed for 100 Gigabit Ethernet links over 40Km single mode fiber. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA. And compliant with 100G 4WDM-40 MSA.
-
Quidway S5300 Series Gigabit Switches
Quidway S5300 series gigabit switches (hereinafter referred to as the S5300s) are new generation Ethernet gigabit switches developed by Huawei to meet the requirements for high-bandwidth access and Ethernet multi- service convergence, providing powerful Ethernet functions for carriers and enterprise customers. Based on the new generation high-performance hardware and Huawei Versatile Routing Platform (VRP) software, the S5300 features large capacity and gigabit interfaces of high density, provides 10G uplinks, meeting customers’ requirements for the 1G and 10G uplink devices of high density. The S5300 can meet the requirements of multiple scenarios such as service convergence on campus networks and intranets, the access to the IDC at a rate of 1000 Mbit/s, and the access to computers at a rate of 1000 Mbit/s on intranets. The S5300 is a case-shaped device with a chassis of 1 U high. The S5300 series are classified into SI (standard) and EI (enhanced) models. The S5300 of the SI version supports Layer 2 functions and basic Layer 3 functions, and the S5300 of the EI version supports complicated routing protocols and rich service features. The models of the S5300 consist of S5324TP-SI, S5328C-SI, S5328C-EI, S5328C-EI-24S, S5348TP-SI, S5352C-SI, S5352C-EI, S5324TP- PWR-SI, S5328C-PWR-SI, S5328C-PWR-EI, S5348TP-PWR-SI, S5352C-PWR-SI, and S5352C-PWR-EI.
-
S2700 Series Switches
Highly scalable and energy-efficient, S2700 Series Switches provide Fast Ethernet 100 Mbit/s speeds for enterprise campus networks. Combining advanced switching technologies, Huawei’s Versatile Routing Platform (VRP) software, and comprehensive built-in security features, this series is well suited for building and expanding future-oriented Information Technology (IT) networks.
-
S3700 Series Enterprise Switches
For Fast Ethernet switching over twisted-pair copper, Huawei’s S3700 Series combines proven reliability with robust routing, security, and management features in a compact, energy-efficient switch.
Flexible VLAN deployment, PoE capabilities, comprehensive routing functions, and capability to migrate to an IPv6 network help enterprise customers build next-generation IT networks.
Choose Standard (SI) models for L2 and basic L3 switching; Enhanced (EI) models support IP multicasting and more complex routing protocols (OSPF, IS-IS, BGP).
-
Fiber Optic Adaptor
An adapter is a mechanical device designed to align fiber-optic connectors. It contains the interconnect sleeve, that holds the two ferrules together.
LC Adapters were developed by Lucent Technologies. They are composed of a plastic housing with an RJ45 push-pull style clip.
-
OTDR NK2000/NK2230
The Mini-Pro OTDR is apply to FTTx and access network construction and maintenance, to test fiber breakpoint, length, loss and input light automatic detection, automatic test by one key.
The tester is compact with 3.5 inch colorful LCD screen, new plastic shell design, shock-proof and drop-proof.
The tester also combine 8 functions with highly integrated OTDR, Event maps, Stable Light source, Optical power meter, Visual fault locator, cable sequence proofreading, cable length measurement and lighting functions. It could quick detection of breakpoint, universal connector, 600 internal storage, TF card, USB data storage and built-in 4000mAh lithium battery, USB charging. It is a good choice for long term field work. -
OTDR NK5600
The NK5600 Optical Time Domain Reflectometer is a high-performance, multi-functional test instrument designed for the FTTx network. The product has a maximum resolution of 0.05m and has a minimum test area of 0.8m.
This product integrates the OTDR/light source, optical power meter, and VFL functions in one body. It uses touch and key dual operation modes. The product has a rich external interface and can be remotely controlled through an Ethernet interface, or through two different USB interface, external U disk, printer and PC data communication.
