Products
-
HUA6000 2U C/DWDM Optical Transport System
HUANET HUA6000 is a compact, high-capacity, low-cost OTN optical transmission system which introduced by HUANET. It adopts CWDM / DWDM common platform design, supports multi-service transparent transmission, and has flexible networking and access capabilities. Applicable to the national backbone network, provincial backbone network, metro backbone network and other core networks, to meet the needs of large-capacity nodes above 1.6T, is the industry‘s most cost-effective transmission application platform. Build a large-capacity WDM transmission expansion solution for IDC and ISP operators.
-
OTN/DWDM 100G 200G Optical Transmission Network Solutions
HUANET HUA6000 is a compact, high-capacity, low-cost OTN optical transmission system which introduced by HUANET. It adopts CWDM / DWDM common platform design, supports multi-service transparent transmission, and has flexible networking and access capabilities. Applicable to the national backbone network, provincial backbone network, metro backbone network and other core networks, to meet the needs of large-capacity nodes above 1.6T, is the industry‘s most cost-effective transmission application platform. Build a large-capacity WDM transmission expansion solution for IDC and ISP operators.
-
10KM 100G QSFP28
HUA-QS1H-3110D is a parallel 100Gb/s Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total system cost savings. The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s on 10km of single mode fiber.
-
80KM 100G QSFP28
HUAQ100Z is designed for 80km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter- face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1.
-
HUANET 1GE GPON ONT ONU HG911A with Anatel Certification
Anatel No.:09627-21-12314
HZW-HG911A(HGU) is a mini GPON ONT terminal device , which applies to pure broadband access.It adopts mini-type compact structure design with high-integration and can provide 1 GE（RJ45）interfaces. Supports the technology of layer 2 Ethernet switch and it’s easy to maintenance and manage.It can be applied to FTTH/FTTP access application for resident and business users.and it is fully compliant to technical regulations such as ITU-T G.984.x and technical requirement of GPON Equipment.
-
HUANET Dual band ONU
1GE+3FE+POTS+AC WIFI GPON ONU is one of the series Gigabit Passive Optical Network user terminals from Shenzhen Huanet Technologies Co.,Ltd. Compliance with ITU-T G.984 GPON international standard, it’s good at inter-operation with most of all GPON OLT in industry by support full OMCI. With cost effective, easy deployment, stable software and strong function advantages, it’s specially suitable for FTTH (Fiber to the Home), and meet the requirements of wide band access network.
-
1GE xPON ONT ONU with Router/Bridage with Anatel Certification
Anatel No.:04266-19-12230
HZW-HG911(HGU) is a mini xPON ONT terminal device , which applies to pure broadband access.It adopts mini-type compact structure design with high-integration and can provide 1 GE（RJ45）interfaces. Supports the technology of layer 2 Ethernet switch and it’s easy to maintenance and manage.It can be applied to FTTH/FTTP access application for resident and business users.and it is fully compliant to technical regulations such as ITU-T G.984.x and technical requirement of xPON
Equipment. -
HUANET EPON OLT 8 Ports
FIBER-LINK 8PON EPON OLT is a 1U standard rack-mounted equipment complying with IEEE802.3ah, YD / T 1475-2006 and CTC 2.0,2.1 and 3.0.It has flexible, easy to deploy, small size, high performance and other characteristics. The product is particularly suitable for residential broadband fiber access (FTTx), telephone and television “triple play”, the power consumption information collection, video surveillance, networking, private network applications and other applications.
-
41CH 100G ATHERMAL AWG
HUA-NET offers a full range of Thermal/Athermal AWG products, including 50GHz, 100GHz and 200GHz Thermal/Athermal AWG. Here we present the generic specification for the 41-channel 100GHz Gaussian Athermal AWG (41 channel AAWG) MUX/DEMUX component supplied for use in DWDM system.
Athermal AWG(AAWG) have equivalent performance to standard Thermal AWG(TAWG) but require no electrical power for stabilization. They can be used as direct replacements for Thin Film Filters(Filter type DWDM module) for cases where no power is available, also suitable for outdoor applications over -30 to +70 degree in access networks. HUA-NET’s Athermal AWG(AAWG) provide excellent optical performance, high reliability, ease of fiber handling and power saving solution in a compact package. Different input and output fibers, such as SM fibers, MM fibers and PM fiber can be selected to meet different applications. We can also offer different product packages, inluding special metal box and 19” 1U rackmount.
The planar DWDM components(Thermal/Athermal AWG) from HUA-NET are fully qualified according to Telcordia reliability assurance requirements for fiber optic and opto-electronic components (GR-1221-CORE/UNC, Generic Reliability Assurance Requirements for Fiber Optic Branching Components, and Telcordia TR-NWT-000468, Reliability Assurance Practices for Opto-electronic Devices).
-
100G DWDM MODULE(4,8,16 CHANNEL)
HUA-NET Dense wavelength division multiplexer (DWDM)utilizes thin film coating technology and proprietary design of non-flux metalbonding micro optics packaging to achieve optical add and drop at the ITUwavelengths. It provides ITU channel center wavelength, low insertion loss,high channel isolation, wide pass band, low temperature sensitivity and epoxyfree optical path . It can be used for wavelength add/drop in telecommunicationnetwork system.
-
200G DWDM MODULE(4, 8, 16 CHANNEL)
HUA-NET 200GHz dense wavelength division multiplexer (DWDM) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging to achieve optical add and drop at the ITU wavelengths. It provides ITU channel center wavelength, low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path . It can be used for wavelength add/drop in telecommunication network system.
-
DWDM DEVICE
HUA-NET Dense wavelength division multiplexer (DWDM) utilizes thinfilm coating technology and proprietary design of non-flux metal bonding microoptics packaging to achieve optical add and drop at the ITU wavelengths. Itprovides ITU channel center wavelength, low insertion loss, high channelisolation, wide pass band, low temperature sensitivity and epoxy free opticalpath . It can be used for wavelength add/drop in telecommunication networksystem.
