OA (Optical Amplifier) used for DCI BOX
OA (Optical Amplifier) The main function of the optical amplifier board is to compensate the power of the signal light in the transmission link, which can simultaneously amplify the optical signal of up to 48 channels (channel interval of 100GHz) or 96 channels (channel interval of 50GHz) in the C-band. It has the characteristics of flat gain, adjustable gain, low noise index, etc. At the same time, the built-in OSC optical monitoring channel of the board supports OSC-based DCN communication, which is an indispensable part of DWDM system and future high-speed system and all-optical network long-distance transmission.
Datasheet OA Product Configuration EDFA Optional built-in 1*EDFA (BA, PA, LA parameters optional) Optional built-in 2*EDFA(BA, PA, LA parameters are optional) OSC The optional built-in 2 x OSC Working wavelength: 1510nm Working rate: 1.25Gb/s VOA MON monitoring port Standard, the optical power difference between MON and the main optical channel is 21 to 23dB OTDR measuring port 20G17 20G25 20G30 Wavelength range(nm) 1528 ~1568 1528 ~1568 1528 ~1568 Gain range(dB) 14 ~ 20 22 ~ 28 27 ~ 33 Max total output optical power(dBm) ≥20 ≥20 ≥20 Noise(dB) ＜5.5 ＜5.5 ＜5.5 Gain flatness(dB) ＜1.5 ＜1.5 ＜1.5 Polarization dependent loss(dB) < 0.5 < 0.5 < 0.5 Input optical power detection range(dBm) -23 ~ 8 -31 ~ 0 -36 ~ -5 Output optical power detection range(dBm) -6 ~ 20 -6 ~ 20 -6 ~ 20 Reflection coefficient(dB) ＜-30 ＜-30 ＜-30 Gain stability (dB) ±0.5 ±0.5 ±0.5
OSC is optionalThe optional built-in 1 x OSC
Application : It is suitable for optical terminal station (OTM), which is used for power amplification of involutory wave signal and pre-amplification of wave signal It is suitable for optical relay station (OLA), complete the amplification of two-way transmission signal, extend the transmission distance
