1GE+WIFI XPON ONU HG611-W

HG611-W is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access. It is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. It adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0. It is compliant with IEEE802.11n STD, adopts with 2×2 MIMO, the highest rate up  to 300Mbps. It fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah. It is designed by chipset Realtek  9602C

Description

Description 1GE+3FE+POTS+AC WIFI GPON ONU is one of the series Gigabit Passive Optical Network user terminals from Shenzhen Huanet Technologies Co.,Ltd. Compliance with ITU-T G.984 GPON international standard, it’s good at inter-operation with most of all GPON OLT in industry by support full OMCI. With cost effective, easy deployment, stable software and strong function advantages, it’s specially suitable for FTTH (Fiber to the Home), and meet the requirements of wide band access network.

Feature
Supports Dual Mode (can access GPON/EPON OLT).
Supports GPON G.984/G.988 standards
Support 802.11n WIFI (2×2 MIMO) function
Support NAT, Firewall function.
Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
Support port mode of VLAN configuration
Support LAN IP and DHCP Server configuration
Support TR069 Remote Configuration and WEB Management
Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode
Support IPv4/IPv6 dual stack
Support IGMP transparent/snooping/proxy
In compliant with IEEE802.3ah standard
Compatible with popular OLT (HW, ZTE, FiberHome…)

Specification

Technical Item

Details

PON interface

1 G/EPON port(EPON PX20+ and GPON Class B+)

Upstream: 1310nm; Downstream: 1490nm

SC/UPC connector

Receiving sensitivity: -27dBm

Transmitting optical power: 0~+4dBm

Transmission distance: 20KM

LAN interface

1x10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector

WIFI Interface

Compliant with IEEE802.11b/g/n

Operating frequency: 2.400-2.4835GHz

support MIMO, rate up to 300Mbps

2T2R,2 external antenna 5dBi

Support: Multiple SSID

Channel:13

Modulation type: DSSSCCK and OFDM

Encoding scheme: BPSKQPSK16QAM and 64QAM

LED

7 LED, For Status of POWER, LOS, PON, LAN1~LAN2, WIFI, WPS

Push-Button

4, for Function of Power on/off, Reset, WPS, WIFI

Operating condition

Temperature : 0+55

Humidity :10%90%non-condensing

Storing Condition

Temperature : -40℃+60

Humidity :10%90%non-condensing

Power supply

DC 12V/1A

Power Consumption

<6W

Net Weight

<0.4kg

Panel lights and Introduction

Pilot  Lamp

Status

Description

WIFI

On

The WIFI interface is up.

Blink

The WIFI interface is sending or/and receiving data (ACT).

Off

The WIFI interface is down.

WPS

Blink

The WIFI interface is securely establishing a connection.

Off The WIFI interface does not establish a secure connection.

PWR

On The device is powered up.
Off The device is powered down.

LOS

Blink The device doses not receive optical signals or with low signals.
Off The device has received optical signal.

PON

On The device has registered to the PON system.
Blink The device is registering the PON system.
Off The device registration is incorrect.

LAN

On Port is connected properly (LINK).
Blink Port is sending or/and receiving data (ACT).
Off Port connection exception or not connected.

 

 

Application

 

 Typical SolutionFTTO(Office)FTTB(Building)FTTH(Home)

 

Typical ServiceBroadband Internet access, IPTV etc.