1GE+3FE+WIFI XPON ONU HG643-W
HG643-W is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access. It is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. It adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0. It is compliant with IEEE802.11n STD, adopts with 2×2 MIMO, the highest rate up to 300Mbps. It is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.It is designed by ZTE chipset 279127
Feature
Supports Dual Mode (can access GPON/EPON OLT).
Supports GPON G.984/G.988 standards
Support 802.11n WIFI (2×2 MIMO) function
Support NAT, Firewall function.
Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
Support port mode of VLAN configuration
Support LAN IP and DHCP Server configuration
Support TR069 Remote Configuration and WEB Management
Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode
Support IPv4/IPv6 dual stack
Support IGMP transparent/snooping/proxy
In compliant with IEEE802.3ah standard
Compatible with popular OLT (HW, ZTE, FiberHome…)
Specification Technical Item Details 1 E/GPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/UPC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0.5~+4dBm Transmission distance: 20KM 1x10/100/1000Mbps and 3x10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: Multiple SSID Channel:13 Modulation type: DSSS、CCK and OFDM Encoding scheme: BPSK、QPSK、16QAM and 64QAM 9 LED, For Status of POWER, LOS, PON, LAN1~LAN4, WIFI, WPS 3, for Function of Power on/off, Reset, WPS Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） DC 12V/1A <6W <0.4kg
Panel lights and Introduction Pilot Lamp Status Description WIFI On The WIFI interface is up. Blink The WIFI interface is sending or/and receiving data (ACT). Off The WIFI interface is down. WPS Blink The WIFI interface is securely establishing a connection. PWR LOS PON LAN1~LAN4
PON interface
LAN interface
WIFI Interface
LED
Push-Button
Operating condition
Storing Condition
Power supply
Power Consumption
Net Weight
Off
The WIFI interface does not establish a secure connection.
On
The device is powered up.
Off
The device is powered down.
Blink
The device doses not receive optical signals or with low signals.
Off
The device has received optical signal.
On
The device has registered to the PON system.
Blink
The device is registering the PON system.
Off
The device registration is incorrect.
On
Port (LANx) is connected properly (LINK).
Blink
Port (LANx) is sending or/and receiving data (ACT).
Off
Port (LANx) connection exception or not connected.
Application Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home) Typical Service：Broadband Internet access, IPTV etc.
