Dualband ONU 4GE+WIFI+CATV XPON ONT HG660-TW
HG660-TW is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides data and video service access. It is based on mature and stable, cost-effective XPON technology. It could switch automatically into EPON mode or GPON mode when access to the EPON OLT and GPON OLT. It adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X. It is designed by Realtek chipset 9607C.
Feature Supports GPON and EPON auto detection Support Rogue ONT detection Support Route mode PPPoE/DHCP/Static IP and Bridge mixed mode Support NAT, Firewall function. Support Internet, IPTV and CATV services automatically bound to ONT ports Support Virtual server, DMZ, and DDNS, UPnP Support Filtering based on MAC/IP/URL Support 802.11 b/g/n, 802.11ac WIFI(2×2 MIMO) function and Multiple SSID Support Flow & Storm Control , Loop Detection and Port Forwarding Support IPv4/IPv6 dual stack and DS-Lite Support IGMP transparent/snooping/proxy Support TR069 Remote Configuration and maintenance Support CATV remote management from OLT Integrated OAM remote configuration and maintenance function Compatible with popular OLT (HW, ZTE, FiberHome…)
Specification Technical Item Details 1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM 4 x 10/100/1000Mbps auto adaptive Ethernet interfaces, Full/Half, RJ45 connector Compliant with IEEE802.11b/g/n/ac 2.4GHz Operating frequency: 2.400-2.483GHz 5.0GHz Operating frequency: 5.150-5.825GHz Support 2*2MIMO, 5dBi external antenna, rate up to 867Gbps Support: multiple SSID TX power: 11n–22dBm/11ac–24dBm RF, optical power : +2~-18dBm Optical reflection loss: ≥60dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 82dBuV（-7dBm optical input） AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm) 10 LED, For Status of PWR、LOS、PON、LAN1、LAN2、LAN3、LAN4、2.4G、5.8G、 Normal(CATV) 3 button for Function of Power on/off, Reset, WPS Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） DC 12V/1A <6W <0.3kg
Panel lights and Introduction Pilot Lamp Status Description (CATV)
PON interface
LAN interface
WIFI Interface
CATV Interface
LED
Push-Button
Operating condition
Storing Condition
Power supply
Power Consumption
Net Weight
2.4G
On
2.4G WIFI up
Blink
2.4G WIFI is sending or/and receiving data (ACT).
Off
2.4G WIFI down
5.8G
On
5G WIFI up
Blink
5G WIFI is sending or/and receiving data (ACT).
Off
5G WIFI down
PWR
On
The device is powered up.
Off
The device is powered down.
LOS
Blink
The device doses not receive optical signals or with low signals.
Off
The device has received optical signal.
PON
On
The device has registered to the PON system.
Blink
The device is registering the PON system.
Off
The device registration is incorrect.
LAN1~LAN4
On
Port (LANx) is connected properly (LINK).
Blink
Port (LANx) is sending or/and receiving data (ACT).
Off
Port (LANx) connection exception or not connected.
Normal
On
Input optical power is between -18dBm and 2dBm
Off
Input optical power is higher than 2dBm or lower than -18dBm
Application Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home) Typical Service：Broadband Internet access, IPV, CATV etc.
