Dispersion Compensation Module (DCM)
The Dispersion Compensation Modules are building blocks of the HUA6000 Optical Transport System and serve at optical communication nodes to correct the pulse spread phenomenon known as Chromatic Dispersion that reduces the maximal transmission distance of data in optical fibers.
HUANET optical compensation function with slope dispersion compensation for standard single-mode fiber can DCM (G.652) were dispersion and dispersion slope compensation broad band in the C-band, allowing the system to optimize residual dispersion. The DCMs offer a high dispersion compensation level and a very low insertion loss penalty. They provide negative dispersion compensation over the full C-Band with possible distance extensions of up to 80 kilometers. Function Dispersion compensation in long haul WDM networks Highlight DWDM system dispersion compensation and broadband low residual dispersion
In the dispersion compensation value of 1545nm wavelength dispersion can reach -2070ps /nm.
G.652 fiber C-band 100% slope compensation (standard value)
Low insertion loss
Low polarization mode dispersion
Hot swappable
Low power consumption
Support for 10/40/100/200/400Gbps
C-Band Range
Performance Parameter Parameter Min. Max. Brillouin Scattering Threshold (dBm) 6 - Non-linear Coefficient (n2/Aeff) (W-1) - 1.4*10-9 Effective Area (Aeff)@1550nm (um2) 20 - Maximum Input Power (dBm) 23 Dimension (mm) 191 (W) x 253 (D) x 42 (H) Environment Operating Temperature (℃) -10℃～+60 Storage Temperature (℃) -40℃～+85 Relative Humidity 5%~95% Non-condensing Ordering Information Parameter DCM-20 DCM-40 DCM-60 DCM-80 DCM-100 DCM-120 Compensated Distance (km) 20 40 60 80 100 120 1545nm Dispersion (ps/nm) -340+/-10 -670+/-20 -1000+/-30 -1340+/-40 -1680+/-50 -2010+/-60 1545nm Relative Dispersion Slope (nm-1) 0.0036 +/- 10% Insertion Loss (dB) ≤3.3 ≤4.7 ≤6.4 ≤8.0 ≤9.5 ≤11.0 Insertion Loss (typ) (dB) 2.7 4.0 5.4 6.7 8.0 9.3 Polarization Mode Dispersion (ps) ≤0.6 ≤0.7 ≤0.8 ≤0.9 ≤1.0 ≤1.1 Polarization Mode Dispersion (typ) (ps) 0.2 0.3 0.4 0.5 0.6 0.7 Polarization Dependent Loss (dB) ≤0.1 ≤0.1 ≤0.1 ≤0.1 ≤0.1 ≤0.1
HUA6000 Series Chassis is the foundation for deploying and managing the HUANET multi-service mixed-media solutions. HUA6000 Series Chassis Optional CH04 Chassis: 482.5(W) x 350(D) x 44.5(H) mm 1U 19-inch chassis 1 network management slot 3 universal service slots CH08 Chassis: 482.5(W) x 350(D) x 89(H) mm 2U 19-inch chassis 1 network management slot 7 universal service slots CH20 Chassis: 482.5(W) x 350(D) x 222.5(H) mm 5U 19-inch chassis 1 network management slot 19 universal service slots Power Consumption: 1U <120W, 2U<200W, 5U<400W Support SNMP, Web, CLI multiple network management modes Support dual power supply redundancy protection, Power supply support AC: 220V / DC: -48V optional HUA6000 Series Chassis support multiple service intermixing: 100G Transponder 100G OEO 2x100G to 200G Muxponder 25G OEO 4/8/16 Channel CWDM MUX/DEMUX 4x25G to 100G Muxponder 2x10G OCP Transponder 4x10G SFP+ Transponder 8×1.25G Convergence 10G Muxponder EDFA Card Applications Telecom HUA DWDM transmission solution
4/8/16/40/48 Channel DWDM MUX/DEMUX,or OADM Card
OLP Optical Line Protection
Data center
5G Network
Long Haul Network
Fiber optical network
DWDM peer-to-peer case
DWDM chain network case
DWDM+OLP optical line protection Case
DWDM Ring network case
DWDM single fiber bidirectional networking case
DWDM ultra long distance solution
