1GE+1FE+CATV+WIFI XPON ONU HG623-TW
HG623-TW is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access. It is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. It adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0. It is compliant with IEEE802.11n STD, adopts with 2×2 MIMO, the highest rate up to 300Mbps. It is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.It is designed by Realtek chipset 9602C.
SkypeEmail
Feature Supports Dual Mode (can access GPON/EPON OLT). Supports GPON G.984/G.988 standards Support CATV interface for Video Service and remote control by Major OLT Support 802.11n WIFI (2×2 MIMO) function Support NAT, Firewall function. Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect Support port mode of VLAN configuration Support LAN IP and DHCP Server configuration Support TR069 Remote Configuration and maintenance Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode Support IPv4/IPv6 dual stack Support IGMP transparent/snooping/proxy In compliant with IEEE802.3ah standard Compatible with popular OLT (HW, ZTE, FiberHome…)
Specification Technical Item Details 1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM 1x10/100/1000Mbps and 1x10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: Multiple SSID Channel:13 Modulation type: DSSS、CCK and OFDM Encoding scheme: BPSK、QPSK、16QAM and 64QAM RF, optical power : +2~-18dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 82dBuV（-7dBm optical input） AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm) 9 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2、 WORN、 NORMAL(CATV) 4, for Function of Power on/off, Reset, WPS, WIFI Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） DC 12V/1A <6W <0.4kg Panel lights and Introduction Pilot Lamp Status Description WIFI On The WIFI interface is up. Blink The WIFI interface is sending or/and receiving data (ACT). Off The WIFI interface is down. WPS Blink The WIFI interface is securely establishing a connection. (CATV)OnInput optical power is higher than 2dBm or lower than -18dBmOffInput optical power is between -18dBm and 2dBmNormal (CATV)OnInput optical power is between -18dBm and 2dBmOffInput optical power is higher than 2dBm or lower than -18dBm
PON interface
LAN interface
WIFI Interface
CATV Interface
LED
Push-Button
Operating condition
Storing Condition
Power supply
Power Consumption
Net Weight
Off
The WIFI interface does not establish a secure connection.
PWR
On
The device is powered up.
Off
The device is powered down.
LOS
Blink
The device doses not receive optical signals or with low signals.
Off
The device has received optical signal.
PON
On
The device has registered to the PON system.
Blink
The device is registering the PON system.
Off
The device registration is incorrect.
LAN1~LAN2
On
Port (LANx) is connected properly (LINK).
Blink
Port (LANx) is sending or/and receiving data (ACT).
Off
Port (LANx) connection exception or not connected.
WORN
Application Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home) Typical Service：Broadband Internet access, IPV, VOD, video surveillance, CATV etc.
