1GE+1FE+CATV+POTS+WIFI XPON ONU HG623-FTW

HG623-FTW is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access. It is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. It adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0. It is compliant with IEEE802.11n STD, adopts with 2×2 MIMO, the highest rate up to 300Mbps. It is fully   compliant  with  technical regulations such as ITU-T G.984.x and IEEE802.3ah.It is designed by Realtek chipset 9602C.

Supports Dual Mode (can access GPON/EPON OLT).

Supports GPON G.984/G.988 standards and IEEE802.3ah.

Support CATV interface for Video Service and remote control by Major OLT

Support SIP Protocol for VoIP Service

Integrated line testing compliant with GR-909 on POTS

Support 802.11n WIFI (2×2 MIMO) function

Support NAT, Firewall function.

Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect

Support port mode of VLAN configuration

Support LAN IP and DHCP Server configuration

Support TR069 Remote Configuration and WEB Management

Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode

Support IPv4/IPv6 dual stack

Support IGMP transparent/snooping/proxy

In compliant with IEEE802.3ah standard

Compatible with popular OLT(HW, ZTE, FiberHome…)

Specification

Technical Item

Details

PON interface

1 G/EPON port(EPON PX20+ and GPON Class B+)

Upstream: 1310nm; Downstream: 1490nm

SC/APC connector

Receiving sensitivity: ≤-27dBm

Transmitting optical power: 0~+4dBm

Transmission distance: 20KM

LAN interface

1x10/100/1000Mbps and 1x10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector

WIFI Interface

Compliant with IEEE802.11b/g/n

Operating frequency: 2.400-2.4835GHz

support MIMO, rate up to 300Mbps

2T2R,2 external antenna 5dBi

Support: Multiple SSID

Channel:13

Modulation type: DSSSCCK and OFDM

Encoding scheme: BPSKQPSK16QAM and 64QAM

CATV Interface

RF, optical power : +2~-18dBm

Optical reflection loss: 45dB

Optical receiving wavelength: 1550±10nm

RF frequency range: 47~1000MHz,  RF output impedance: 75Ω

RF output level: 82dBuV-7dBm optical input

AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm

MER: 32dB(-14dBm optical input), 35(-10dBm)

POTS Port

RJ11

Max 1km distance

Balanced Ring, 50V RMS

LED

10 LED, For Status of WIFIWPSPWRLOSPONLAN1~LAN2WORNNORMAL(CATV), FXS

Push-Button

4, for Function of Power on/off, Reset, WPS, WIFI

Operating condition

Temperature : 0+50℃

Humidity :10%90%non-condensing

Storing Condition

Temperature : -40℃~+60

Humidity :10%90%non-condensing

Power supply

DC 12V/1A

Power Consumption

<6W

Net Weight

<0.4kg

Panel lights and Introduction

Pilot  Lamp

Status

Description

WIFI

On

The WIFI interface is up.

Blink

The WIFI interface is sending or/and receiving data (ACT).

Off

The WIFI interface is down.

WPS

Blink

The WIFI interface is securely establishing a connection.

Off The WIFI interface does not establish a secure connection.
PWR On The device is powered up.
Off The device is powered down.
LOS Blink The device doses not receive optical signals or with low signals.
Off The device has received optical signal.
PON On The device has registered to the PON system.
Blink The device is registering the PON system.
Off The device registration is incorrect.
LAN1~LAN2 On Port (LANx) is connected properly (LINK).
Blink Port (LANx) is sending or/and receiving data (ACT).
Off Port (LANx) connection exception or not connected.
FXS On Telephone has registered to the SIP Server.
Blink Telephone has registered and data transmission (ACT).
Off Telephone registration is incorrect.
WORN(CATV) On Input optical power is higher than 2dBm or lower than -18dBm
Off Input optical power is between -18dBm and 2dBm
Normal(CATV) On Input optical power is between -18dBm and 2dBm
Off Input optical power is higher than 2dBm or lower than -18dBm

 

Application 

Typical SolutionFTTO(Office)FTTB(Building)FTTH(Home)

 Typical ServiceBroadband Internet access, IPTV, VOD, video surveillance, CATV, VoIP etc.